What do you do with a drop ceiling?

Modern dropped ceilings were initially created to hide the building infrastructure, including piping, wiring, and/or ductwork, by creating a plenum space above the dropped ceiling, while allowing access for repairs and inspections. Drop ceilings may also be used to hide problems, such as structural damage.

Keeping this in view, how much does it cost to put in a drop ceiling?

Having a drop ceiling installed runs about $2-$5 a square foot depending on the type and size of the panels, the height of the ceiling (including if a rolling scaffold is needed), whether the ceiling covers one large open space or several smaller rooms (which requires more labor), and the type and amount of additional

Also, what is the difference between a drop ceiling and a suspended ceiling? Definition. A drop ceiling, or suspended ceiling, consists of panels or tiles that hang a few inches below the main structural ceiling. In other words, the suspended ceiling does not make up a permanent structural foundation, but rather serves as a covering for the more solid framework above.

Subsequently, question is, is a drop ceiling cheaper than drywall?

If you're looking for a very simple and cheap ceiling option, drop ceilings are for you. The average drop ceiling cost ranges from $1/sf to $2/sf. Drop ceiling installations are easy and the labor cost should be less than a drywall ceiling. Drop ceilings are quite common in rooms with large ducts and HVAC piping.

Is it hard to install a drop ceiling?

You want to know if you can install a drop ceiling in your basement on your own. The short answer is yes! Yes you can and it's not that hard. You can save a lot of money by doing it yourself IF you don't make some of these key mistakes.

How far down does a drop ceiling hang?

This type of ceiling literally “drops” the ceiling. So that panels can be pushed up through the grid and then set into place, a minimum clearance beneath the lowest objects (such as floor joists) is required-typically from 3 to 8 inches.

What is a tray ceiling?

Shop This LookA tray ceiling, also called an inverted or recessed ceiling, features a center section that is several inches (or several feet) higher than the areas around the perimeter of the room. This design allows for the use of colors painted on the trim that can turn a bland ceiling into a focal point.

How do you measure for a drop ceiling?

To do this, you must measure the room and apply a simple formula.

Measure the length and width of the ceiling, and note the measurements on a piece of paper.
Divide the ceiling tile length into the room's width.
Divide the result in half to get the length of your border panel.

How do you hang something heavy on a drop ceiling?

Steps

Locate a ceiling joist using a stud finder.
Make marks on the joist where the object will hang.
Check that every mark is on the joist.
Grab C-shaped hooks to hang objects close to the ceiling.
Get wire clips to support low hanging objects.
Purchase ceiling anchors to attach your object to hollow drywall.

How do you fix a sagging drop ceiling?

Move the ladder to allow access above the ceiling grid. Locate the support located nearest the low-point of the ceiling sag. Place the magnetic side of torpedo level against the flat surface of the ceiling grid that sits parallel to the floor.

What is the point of a drop ceiling?

Aesthetics. Modern dropped ceilings were initially created to hide the building infrastructure, including piping, wiring, and/or ductwork, by creating a plenum space above the dropped ceiling, while allowing access for repairs and inspections. Drop ceilings may also be used to hide problems, such as structural damage.

Why do drop ceiling tiles have holes?

In most cases, a drop ceiling (more properly know as an "acoustic tile ceiling" is used for two main reasons. Second, the tiles absorb sound and reduce noise pollution in the room. The pores trap sound waves, thereby reducing the overall amount of sound that's transmitted back into the room.

How do you install a drop ceiling grid?

Draw a Room Scale. Draw the exact dimensions of the room to scale on graph paper.
Choose the Lighting Location.
locate exact position for suspended ceiling.
Install Wiring.
Attach Suspension Wires.
Splice the Main Tees.
main tees installed level with wall angle.
drop ceiling panels into position.

How do you calculate how many ceiling tiles do I need?

1) Calculate square footage of your ceiling/wall area to be covered - Lets say that your room is a rectangular room. Measure 2 sides, the shorter side and the longer side and multiply those 2 numbers. Example: This could be 12 and 16 so you would multiply 12x16=192 Square feet.

What is a stretch ceiling?

A Stretch Ceiling is a suspended ceiling system consisting of two basic components – a perimeter track and lightweight fabric membrane which stretches and clips into the track. In addition to ceilings the system can be used for wall coverings, light diffusers, floating panels, exhibitions and creative shapes.

How do you install recessed lighting in a drop ceiling?

How to Install Recessed Lighting in Drop Ceiling Panels

Determine the locations for the recessed lights.
Remove the ceiling tile at each recessed light location.
Cut the suspension wire to the distance between the mounting clip and the main T-bar plus 24 inches.
Feed the bent end of the wire through the wire suspension clip.

What is a drop ceiling in a basement?

Total Basement Finishing (TBF) recommends a drop or suspended ceiling in a finished basement. Suspended on steel wires from the basement ceiling joists, a drop ceiling consists of a lightweight steel grid that supports ceiling tiles and light fixtures. TBF's ceiling tiles are made specifically for use in basements.

What can I put on my ceiling instead of drywall?

The following alternatives are not always cheap or easily installed, but they lack the many flaws which drywall suffers from.

Cement Board. Photo Credit: Michael Holley.
Veneer Plaster.
Wood.
Ceiling Planks.
Drop Ceilings.

What is above a drop ceiling?

A drop or dropped ceiling is the ceiling that is hung below the main (structural) ceiling. The area above the dropped ceiling is called the plenum space, as it is usually used for the HVAC air return. The plenum space is also very commonly used to conceal piping, wiring, and ductwork.

Can you replace a drop ceiling with drywall?

If your drop ceiling is looking a little shabby and you're ready for a change, the first step is to remove the suspended ceiling in the opposite order it was originally installed: tiles, lights and metal grid. Once removed, you can repair the original ceiling, if possible, or add new sheets of drywall.

Should you drywall a basement ceiling?

Drywall Basement CeilingsLooks aren't the only reason to opt for a drywall ceiling in the basement. There are actually some very practical reasons as well. Maximizing the basement headroom is a big issue for many homeowners, and drywall ceilings are ideal in basements where the ceiling is already low.

What kind of drywall do you use for a basement ceiling?

Drywall Size - Basement Drywall ThicknessDrywall boards come in 3 common thicknesses. There's 1/4 inch drywall, 1/2 inch drywall, 5/8ths of an inch drywall and 3/4 inch drywall. The most commonly installed thickness, per my extensive Google searching, is 1/2 inch. This is what I had installed in my basement.

What is the best ceiling for a basement?

Low Basement Ceiling Ideas

Beadboard. This style of wood paneling is extremely popular in Cape Cod-style homes, although it can be used with most architectural styles.
Corrugated Metal.
Drywall.
Painted Exposed Beams and Pipes.
Wood Paneling.
Wood Planks.
Drop Ceiling Tiles.
PVC Tiles.